The mobile home identification supplement is used in conjunction with a self-issue single trip permits to facilitate the movement of a manufactured homes (mobile home, modular unit, park model).   By obtaining identification supplements you will be able to use the self- issue single trip permits for mobile home movements.

The identification supplement identifies the power unit towing the manufactured home.  The ID supplement shows the maximum dimensions allowed when using self-issue permits. A self -issue single trip permit (SFN14242) must be completed for each oversize mobile home movement.    

ID supplements can be issued for a maximum of:

Width - 14 feet 6 inches

Height - 15 feet 6 inches

Length - 120 feet

Overhang -   No limit

 Once you have purchased and printed the identification supplement(s), you will receive an email with a link.  You MUST go to this link and print the required policy, documents, and list of vertical clearances (when applicable.)  The required documents must be stapled to original identification supplement and placed in the truck.  Failure to attach the required documents automatically voids the identification supplement.

If you do not receive the email go to www.nd.gov/ndhp

Click on “Motor Carrier” on left side

Click on “Permit Policies for Oversize/Overweight”

Print the required documents (description after each document will let you know which ones to print.)

Single trip movement approval forms (self-issue permits) are used in conjunction with mobile home identification supplements. A self-issue permit must be completed in its entirely prior to movement on the highway system. Self-issue single trip permits can be purchsed on-line using the NDHP E-permit System. You must have a current identification suppliement number. Self-issue single trip permits can also be obtained by completing the Application for Single Trip Movement Approval Forms  and fax or mail your request.